NO HOT WATER? Follow These Very Easy Tips

Call Today

Were you searching for content about What Would Cause My Electric Water Heater to Stop Working??

Many modern residences make use of an electric hot water heater for their heating system, because of its convenience as well as convenience of use. However, much like any other electric appliances, problems may emerge with its usage, suddenly. It can be actually frustrating to awaken to a cool shower instead of a hot one or having your bathroom with water that isn't warm enough and even also warm. Whatever the case may be, water heater troubles can be rather stressful. Fortunately, we've made a checklist of possible services to your hot water heater issues. There are a number of variables that could trigger much of these troubles, it could be a problem with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you switch off the major power supply for safety. Whatever the problem is, getting it taken care of must not posture too much of an issue if you comply with these actions:

Examine Your Power Supply:

As basic as this may seem, it is extremely essential. Without ample power, your hot water heater will not function. So the first thing to do when your water suddenly stops working is to verify that it isn't a power issue. Inspect if the fuse is blown out or the breaker tripped. If the circuit breaker is the problem, just turn it off and on once again. Replace any type of broken or worn-out fuse. Test the appliance with power after these changes to see if it's now working.

Examine the Burner in the Hot Water Heater:

If it's not a power trouble, after that attempt taking a look at your burner if it is still working. Evaluate each of your heating elements to be sure the trouble isn't with any one of them. If any one of them is malfunctioning, replace that part and then examine whether the warm water is back on.

Inspect Your Thermostat:

If your water heater still isn't working or the water coming out isn't warm enough, you may need to inspect the temperature settings on your upper thermostat. Guarantee the circuit breaker is switched off before doing anything. Open the accessibility panel and also press the red switch for temperature level reset over the thermostat. This must assist heat up the water. Turn the circuit breaker back on and check if the problem has actually been settled.

Call An Expert:

If after replacing all defective parts and resetting your temperature level, the hot water heater still isn't functioning, you may need to contact an expert plumber for a specialist point of view. The issue with your heater could be that the cold and hot faucets have been switched or it might be undersized for the quantity of warm water needed in your home. Whatever the instance might be, an expert plumber would aid fix the issue.

Verdict

Hot water heater problems are not always significant. A number of them are because of small problems like a blown fuse or worn-out burner. Changing the defective parts need to work. However, if you are still incapable to resolve the problem, give a call to your local plumber to find to get it fixed.

Common Reasons Why Your Hot Water Heater Isn’t Working

Water Gets Too Hot

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

Water Doesn’t Get Hot

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

Leaking Water Heater

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

Noisy Water Heater

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

Pilot Light Keeps Going Out

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

Water Smells Bad

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

Water Looks Brown Or Rusted

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

As a devoted reader on Hot Water Heater Repair, I thought sharing that piece of content was important. Are you aware of another person who is occupied with the topic? Do not hesitate to share it. I treasure reading our article about Hot Water Heater Repair.

Free Estimates